Zoll AutoPulse Rev A Manuel d'utilisateur télécharger pdf (Page 28)

Page 5-6 P/N. 12457-001 Rev. 2

Power System User Guide

5.5 Battery Rotation

After every use, at the beginning of a shift, or at least once every 24 hours, the Battery in the AutoPulse

should be replaced with a fully charged Battery.

Figure 5-5 Four Battery rotation

Four Battery Rotation—to be done after every use and/or once per shift (see Figure 5-5 above).

• Remove the Battery from the AutoPulse, and place it into the Charger.

• Remove the spare Battery, and place it into the Charger.

• Take two fully charged Batteries from the Charger, check for green LEDs on each Battery, and then

place one into the AutoPulse, and use the second as a spare.

• Power on the AutoPulse and ensure no faults are displayed.

Replace the spare Battery

with a freshly-charged

Battery from the

Charger.

Charge the Platform Battery

and the Spare Battery.

Check the Battery

status

LED

s before

placing a Battery

in service.

Replace the Platform

Battery with a freshly

charged Battery from

the Charger.

Recommended daily 4 Battery maintenance routine

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 49 50

Pas de commentaire

Zoll AutoPulse Rev A Manuel d'utilisateur Page 28